10 m GRP pole, outrigger system rotating and hoistable, winch drive, GFK-KAK has the item number 8128.60 and is characterised by nominal height 10 m, outrigger, tapered design.
At 10 m of visible pole height, the pole is designed for prestigious locations, industrial sites and groups of poles. For poles of this height we recommend portrait flags of roughly 500 to 700 cm in length – as a rule of thumb, a flag should be about half to two thirds of the nominal height. Installation requires a foundation with a ground socket – the 10 m nominal height refers to the visible section above ground level. You will find the matching foundation plan in the „Instructions“ tab. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Internal halyard, pull band or halyard running inside the pole tube, self-locking with crank drive. Fast and convenient hoisting system with the greatest possible theft protection. 2-piece halyard with swivel shackle, rotatably mounted pole cap with integrated rope deflection. Maintenance-free special winch inside the pole tube, self-locking, with removable special crank. Pole top with an elegant aluminium mushroom cap, white.
Nominal height (NH): 10.00 m, foundation depth: 0.45 m, diameter at top = 65 mm, diameter at bottom = 135 mm
No special flag finishing is required. All common, freely flying types of flag up to a max. fabric size of 1.50 x 5 m can be hoisted. Banner flags that are tensioned downwards are not well suited to permanent flying and must be taken down in storms.
Tilting mount with safety hinge included in the pole price
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0