Combined flag and light pole ZA100 KOMBI, 7 m high, with 1 LED floodlight has the item number 8112.27 and is characterised by nominal height 7 m, pole diameter 100 mm, outrigger, cylindrical design. This model is available from 1.270,92 € incl. VAT.
At a nominal height of 7 m, the pole is the typical choice for company entrances, car dealerships and club grounds. When choosing a flag, aim for 350 to 500 cm in length in portrait format, or around 150 × 250 cm in landscape. The foundation holds a ground socket, out of which the 7 m nominal height projects. Choose the ground socket to match the 100 mm tube diameter. You will find the matching foundation plan in the „Instructions“ tab. The tube is made of aluminium and has a cylindrical profile with a diameter of 100 mm. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Car park lighting and flag advertising with a single pole saves costs and is advantageous in planning terms. As an added benefit, the flag remains legible at night too – at least in a perceptible form.
Cylindrical pole tube with groove, swivel bracket, internal halyard.
Poles equipped with 1 or 2 LED floodlights IP65, 50 watt, cable pre-installation inside the pole tube, empty box(es), cable clamps, strain relief, floodlights with mounting brackets, connecting cables, 2-floodlight version: pole top piece with pre-drilled crossbar, L = 520 mm
Nominal height: 7 m with 100 mm Ø
No special flag finishing is required.
All common, freely flying types of flag up to a maximum size of 1.50 x 4.00 m can be used. The flags must be finished at the top edge with a hollow hem (Ø 30 mm) The flag is slid onto the telescopic bracket by its hollow hem and the side carabiners are hooked into the loosely supplied flag sling. The flag slings hold the flag so that it can rotate on the pole tube.
Prices incl. tilting mount and anchor cage, cable pre-installation, LED floodlight with bracket.
Question not listed? All questions & answers · or call us: 09833 98894-0