+49 (0) 9833 9889 40 | Mon–Fri 8am–5pm |
Companies & Business Car Dealerships Clubs & Sports Clubs Municipalities & Public Sector Hotels & Hospitality Private Customers & Gardens Events & Trade Fairs
Info & Tips Glossary About Quality Size Recommendation Catalogue
| Locations Discounts Contact Reviews FAQ |
DeutschlandEnglishÖsterreichSchweiz
TÜV-certified
Made in Germany
We are happy to advise you Germany 09833 98894-0
Freight costs Sign in 0 Basket
You are here: Flagpole range > Internal halyard, aluminium flagpole, cylindrical, fixed > 7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive
7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive

7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive

7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive
Show reviews »
Quality seals and awards
Produktdetails

Key information at a glance

Item no. 8119.07
Hoisting typeInternal halyard
Pole shapecylindrical
MaterialAluminium
Height7 m
MastdurchmesserØ 100 mm
Advice by phone
Our hotline is available Mon–Thu 7:30am–5pm and Fri until 12:30pm: Our hotline number
Freight delivery to Germany from €88
Exact price by postcode in the basket · volume discounts on multiple poles
Volume discount on flagpoles from 3 units · details
from 3−2 % from 6−3 % from 9−4 % from 12−5 % from 15−6 % from 20−7 % from 25−8 %
Applies to poles only, delivered to the same unloading point and the same customer. The discount is deducted automatically in the basket.
Your price
net € 603,00 € 717,57
incl. VAT plus Freight costs
Delivery time approx. 10–15 working days
Order the accessories you need at the same time

The ground socket is not included. It is set into the concrete foundation – after which the pole is simply inserted.

Centring sleeve for cylindrical flagpoles, Ø 100 mm, without anti-twist and rem Centring sleeve for cylindrical flagpoles, Ø 100 mm, without anti-twist and rem
+ 84,49 €
Add to basket now
Response usually within 1 hour (Mon–Fri) · no obligation & free of charge
5-year warranty
Purchase on account for public authorities & municipalities
Buyer protection & secure payment
Payment methods: Visa Mastercard girocard PayPal Klarna Wero
7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive
7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive Item no. 8119.07
– incl. VAT · incl. accessories
  • Wind-stable, torsion-resistant construction for permanent outdoor use
  • Anodised aluminium – corrosion-free, UV- and weather-resistant
  • 5-year warranty · Made in Germany
  • As a complete set: ground socket & accessories can be ordered with it

7 m cylindrical aluminium flagpole, ZI100K, Ø 100 mm, internal halyard, winch drive has the item number 8119.07 and is characterised by nominal height 7 m, pole diameter 100 mm, internal halyard, cylindrical design. This version is available from 717,57 € incl. VAT.

7 m above ground – which means the pole is the typical choice for company entrances, car dealerships and club grounds. We recommend portrait flags of 350 to 500 cm in length, or landscape formats around 150 × 250 cm. The pole is set into a ground socket cast in concrete; the stated 7 m are the visible height above ground, so the overall length is correspondingly greater. The pole diameter of 100 mm determines the matching socket size. You will find the matching foundation plan in the „Instructions“ tab. aluminium as the material and a cylindrical tube cross-section of 100 mm characterise this design. The internal halyard runs protected inside the pole and makes unauthorised lowering of the flag more difficult.

The ZI100K with a nominal height of 7 m is the most compact version of this series and therefore the right choice wherever a closed pole surface is wanted but the flag should not tower above a building. The halyard runs entirely inside the pole tube – there is nothing to grab from the outside, which is the most effective protection against flag theft.

The pole is operated using the Flaglift crank hoisting device. The stainless steel halyard is guided spring-tensioned as a continuous loop in the pole groove, and a plug cylinder in the safety bolt locks the crank against unauthorised operation. The flag hangs by its topmost carabiner in the eyelet of the long slide, while the remaining carabiners engage in the 4 plastic flag fabric holders. To stop the flag riding up in gusts, the flag weight is hooked into the lowest carabiner.

Pole tube and surface: cylindrical tube with groove, Ø 100 mm with a 5 mm wall thickness, material EN AW-6082T6. The anodised layer to Euras standard DIN 17611 with at least 20 micron layer thickness keeps it looking good for years.

Equipment

  • Top cap in silumin casting with integrated rope pulley
  • hoisting system running concealed inside the pole tube
  • 4 flag fabric holders in the pole groove
  • flag weight with stainless steel carabiner on the lowest carabiner hook
  • Flaglift crank hoisting device with stainless steel halyard, spring tension, plug cylinder and hand crank

Technical data Nominal height 7 m, total length 7.80 m (0.80 m sits in the foundation), Ø 100 mm, wall thickness 5 mm

Flag finishing Any standard freely flying flag up to 1.50 x 4.00 m fits – no special finishing is needed; the flag carabiners are simply hooked into the eyelets of the flag fabric holders.

Delivery: ready to hoist.

Frequently asked questions about this pole

Foundation plan for this pole (PDF) Dimensions of the concrete foundation, installation depth of the ground socket and concrete grade – ready to print for your groundworks contractor.
Operation & maintenance The assembly and operating instructions supplied with the pole are authoritative. For guidance: the wind strength above which the flag should be taken down and how to bring it in gently and store it. Visually inspect the rope, pulley, ground socket and pole base regularly, and additionally after a storm.

Key technical data

Pole tube
Ø 100 mm, wall thickness 5.0 mm
Max. flag size
max. 4.00 x 1.50 m (portrait)
Do flagpoles need a foundation?
Yes, flagpoles should always have a foundation. As a rule, a ground socket is set in concrete and the flagpole is then simply inserted into it. This means the pole can easily be removed from the socket again at any time.
Which concrete is needed for the foundation?
Concrete C 25/30 – you will also find this information on the foundation plan. Concrete of grade C 25/30 is available from specialist suppliers (concrete plants, builders' merchants).
Do the foundation and the flagpole have to be installed by a specialist company?
With a little practical skill, any DIY enthusiast can install the foundation and the flagpole themselves following the instructions supplied. It is not strictly necessary for this to be done by a specialist company.
So what does ZI75 mean?
The I in ZI75 stands for internal halyard.
What are the advantages of an internal hoisting mechanism?
Flag and pole are considerably better protected against theft and vandalism. Poles with an internal hoisting mechanism are often more convenient to operate as well (e.g. by winch). It is less susceptible to dirt and moisture. The internal halyard is also quieter, since it cannot knock against the pole.
Is it possible to retrofit a flagpole with an outrigger?
Converting ZI poles with an internal halyard to ZA poles is no problem. The pole is then fitted with an outrigger that can be hoisted. The Z series with a standard hoisting mechanism can be converted to ZD, which cannot be hoisted. For other poles, please enquire.

Question not listed? All questions & answers · or call us: 09833 98894-0