Wall bracket Z75-W in stainless steel for horizontal mounting, 0.80 m, Ø 76 mm

The Z75W façade outrigger in the 0.80 m version is designed for flags 0.80 m wide, with an outrigger length of 0.95 m and a weight of 12 kg. It consists of cylindrical stainless steel tube of 76 mm diameter with a welded-on anchor plate (300 x 300 x 8 mm, hole pattern 250 x 250 mm, four 15 mm holes). It deliberately has no hoisting device: the flag is hooked onto four ring eyes on the underside of the tube. As it is therefore clamped only along its top edge, a safety line against flipping over is essential – the flag making provides an edge tape with corner reinforcement and snap hook on the building side. If two outriggers are mounted mirrored above one another, banner flags tensioned on both sides made from perforated fabric can also be fitted; these need punched eyelets and are fastened with tension hooks. The maximum flag height is 6 m.