7 m cylindrical aluminium flagpole, ZA75K, Ø 75 mm, internal halyard, winch drive, outrigger / gallows arm has the item number 8106.17 and is characterised by nominal height 7 m, pole diameter 75 mm, outrigger, cylindrical design. Prices start at 546,21 € incl. VAT.
Designed for 7 m of visible height, the pole is the typical choice for company entrances, car dealerships and club grounds. Suitable flags are portrait formats from 350 to 500 cm in length, or landscape flags around 150 × 250 cm. The pole is set into a ground socket in a concrete foundation; the 7 m nominal height is measured from ground level. Choose the ground socket to match the 75 mm tube diameter. You will find the matching foundation plan in the „Instructions“ tab. The material used is aluminium; the pole tube is cylindrical with a diameter of 75 mm. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
The internal halyard of the ZA75K offers the best possible protection against flag theft, and operation is simple and convenient.
The ZA75K is equipped with the new Flaglift crank hoisting device; the spring-tensioned stainless steel halyard is installed as a continuous loop in the pole groove. Protection against unauthorised operation is provided by the plug cylinder in the safety bolt. On the bracket/gallows poles, a rotor carrier is mounted on the long slide. The rotor turns with the removable flag bracket. To prevent the flag from riding up in gusts, the flag weight is attached to the lowest flag carabiner. The high-grade material EN AW-6082T6 ensures lasting stability. The anodised layer to Euras standard DIN 17611 (at least 20 micron layer thickness) guarantees a durable, attractive surface finish.
Equipment
ready to hoist
Nominal height 7.00 m, total length 7.60 m, D = 75 mm,
The poles are approved for a maximum freely flying flag area of 1.50 x 4.00 m. The flag must be taken down from wind force 9 Beaufort (from 75 km/h).
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
Custom-made – excluded from the right of withdrawal
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
