5 m cylindrical aluminium flagpole, ZA75K, Ø 75 mm, internal halyard, winch drive, outrigger / gallows arm has the item number 8106.15 and is characterised by nominal height 5 m, pole diameter 75 mm, outrigger, cylindrical design. This version is available from 496,23 € incl. VAT.
5 m above ground – which means the pole is particularly suited to front gardens, terraces and smaller company premises. We recommend portrait flags of 250 to 350 cm in length, or landscape formats around 150 × 200 cm. The pole is set into a ground socket cast in concrete; the stated 5 m are the visible height above ground, so the overall length is correspondingly greater. The pole diameter of 75 mm determines the matching socket size. You will find the matching foundation plan in the „Instructions“ tab. aluminium as the material and a cylindrical tube cross-section of 75 mm characterise this design. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
The internal halyard of the ZA75K offers the best possible protection against flag theft, and operation is simple and convenient.
The ZA75K is equipped with the new Flaglift crank hoisting device; the spring-tensioned stainless steel halyard is installed as a continuous loop in the pole groove. Protection against unauthorised operation is provided by the plug cylinder in the safety bolt. On the bracket/gallows poles, a rotor carrier is mounted on the long slide. The rotor turns with the removable flag bracket. To prevent the flag from riding up in gusts, the flag weight is attached to the lowest flag carabiner. The high-grade material EN AW-6082T6 ensures lasting stability. The anodised layer to Euras standard DIN 17611 (at least 20 micron layer thickness) guarantees a durable, attractive surface finish.
Equipment
ready to hoist
Nominal height 5.00 m, total length 5.60 m, D = 75 mm,
The poles are approved for a maximum freely flying flag area of 1.50 x 4.00 m. In terms of wind load, 5 m poles may fly a flag.
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
Custom-made – excluded from the right of withdrawal
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
