6 m cylindrical aluminium flagpole, ZA75K, Ø 75 mm, internal halyard, winch drive, outrigger / gallows arm has the item number 8106.16 and is characterised by nominal height 6 m, pole diameter 75 mm, outrigger, cylindrical design. The variant can be supplied from 511,70 € incl. VAT.
At 6 m of visible pole height, the pole is the typical choice for company entrances, car dealerships and club grounds. For poles of this height we recommend portrait flags of roughly 300 to 400 cm in length – as a rule of thumb, a flag should be about half to two thirds of the nominal height. Installation requires a foundation with a ground socket – the 6 m nominal height refers to the visible section above ground level. The ground socket has to match the 75 mm diameter. You will find the matching foundation plan in the „Instructions“ tab. The cylindrical pole body of aluminium measures 75 mm in diameter. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
The internal halyard of the ZA75K offers the best possible protection against flag theft, and operation is simple and convenient.
The ZA75K is equipped with the new Flaglift crank hoisting device; the spring-tensioned stainless steel halyard is installed as a continuous loop in the pole groove. Protection against unauthorised operation is provided by the plug cylinder in the safety bolt. On the bracket/gallows poles, a rotor carrier is mounted on the long slide. The rotor turns with the removable flag bracket. To prevent the flag from riding up in gusts, the flag weight is attached to the lowest flag carabiner. The high-grade material EN AW-6082T6 ensures lasting stability. The anodised layer to Euras standard DIN 17611 (at least 20 micron layer thickness) guarantees a durable, attractive surface finish.
Equipment
ready to hoist
Nominal height 6.00 m, total length 6.60 m, D = 75 mm,
The poles are approved for a maximum freely flying flag area of 1.50 x 4.00 m. In terms of wind load, 6 m poles may fly a flag.
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
Custom-made – excluded from the right of withdrawal
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
