6 m cylindrical aluminium flagpole, ZA90, internal halyard, outrigger / gallows arm has the item number 8105.06 and is characterised by nominal height 6 m, pole diameter 90 mm, outrigger, cylindrical design. The entry-level price is 527,17 € incl. VAT.
With 6 m of visible height above ground, the pole is the typical choice for company entrances, car dealerships and club grounds. Portrait flags of between 300 and 400 cm in length suit this pole; in landscape format, sizes around 150 × 200 cm work well. The pole is installed in a ground socket cast in concrete; the stated 6 m remain visible above the foundation. The pole diameter of 90 mm determines the matching socket size. You will find the matching foundation plan in the „Instructions“ tab. At 90 mm in diameter, the cylindrical tube is made of aluminium. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Flagpoles with a telescopic bracket ensure advertising impact regardless of the wind. The flag is spread out and easy to read at all times. High operating comfort and extensive theft protection thanks to an internal halyard proven tens of thousands of times over characterise this hoisting system.
ZA90: perlon halyard Ø 5 mm running inside the pole tube, control housing with lockable door and quick-fixing system (SFS) for the halyard.
Delivery: ready to hoist
Nominal height 6.00 m, total length 6.70 m, D = 90 mm, telescopic bracket 100/160 cm, cylindrical pole tube with groove, EN AW-6082T6, silver anodised 20 my, perlon halyard, internal halyard, control door with bolt lock, 4 flag slings, flag weight 450 g, with carabiner.
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30.00 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m. To raise the flag it is slid onto the telescopic bracket by its hollow hem. The side carabiner hooks are hooked into the loosely supplied flag slings. The flag slings rotate along with the flag under wind load. Flag sizes (max.) of 1.50 x 4.00 m
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
Custom-made – excluded from the right of withdrawal
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
