6 m cylindrical aluminium flagpole, ZA90K, winch drive, internal halyard, outrigger / gallows arm has the item number 8104.06 and is characterised by nominal height 6 m, pole diameter 90 mm, outrigger, cylindrical design. This version is available from 653,31 € incl. VAT.
6 m above ground – which means the pole is the typical choice for company entrances, car dealerships and club grounds. We recommend portrait flags of 300 to 400 cm in length, or landscape formats around 150 × 200 cm. The pole is set into a ground socket cast in concrete; the stated 6 m are the visible height above ground, so the overall length is correspondingly greater. The pole diameter of 90 mm determines the matching socket size. You will find the matching foundation plan in the „Instructions“ tab. aluminium as the material and a cylindrical tube cross-section of 90 mm characterise this design. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Flagpoles with a telescopic bracket ensure advertising impact regardless of the wind. The flag is easy to read at all times. High operating comfort and extensive theft protection thanks to an internal halyard proven tens of thousands of times over characterise this hoisting system.
ZA90K: stainless steel rope running inside the pole tube, equipped with the new FlagLift crank hoisting system. The high-grade EN AW-6082T6 alloy ensures lasting stability. The anodised layer to Euras standard DIN 17611 guarantees a durable, attractive surface finish.
Elegant, rotatably mounted collar (rotor), maintenance-free, with a removable telescopic bracket in aluminium, silver anodised,
Delivery: ready to hoist
Nominal height 6.00 m, total length 6.70 m, D = 90 mm, telescopic bracket 100/160 cm, cylindrical pole tube with groove, silver anodised 20 my
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30.00 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m. To raise the flag it is slid onto the telescopic bracket by its hollow hem. The side carabiner hooks are hooked into the loosely supplied flag slings. The flag slings rotate along with the flag under wind load. Flag sizes (max.) of 1.50 x 4.00 m
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
Custom-made – excluded from the right of withdrawal
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
