9 m aluminium flagpole, ZA100, Ø 100 mm, internal halyard, bracket/gallows arm has the item number 8115.09 and is characterised by nominal height 9 m, pole diameter 100 mm, outrigger, cylindrical design. Prices start at 781,83 € incl. VAT.
Designed for 9 m of visible height, the pole remains highly visible even across larger commercial sites and car parks. Suitable flags are portrait formats from 450 to 650 cm in length, or landscape flags around 150 × 300 cm. The pole is set into a ground socket in a concrete foundation; the 9 m nominal height is measured from ground level. The ground socket has to match the 100 mm diameter. You will find the matching foundation plan in the „Instructions“ tab. The material used is aluminium; the pole tube is cylindrical with a diameter of 100 mm. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Flagpoles with a telescopic bracket ensure advertising impact regardless of the wind. The flag is easy to read at all times. High operating comfort and extensive theft protection thanks to an internal halyard proven tens of thousands of times over characterise both hoisting systems: ZA100 with perlon halyard Ø 5 mm running inside the pole tube, control housing with lockable door and quick-fixing system (SFS) for the halyard.
Delivery: ready to hoist
Nominal height 9.00 m, total length 9.80 m, D = 100 mm, telescopic bracket 100/160 cm, cylindrical pole tube with groove, EN AW-6082T6, silver anodised 20 my, perlon halyard, internal halyard, control door with bolt lock, 4 flag slings, flag weight 450 g, with carabiner.
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30.00 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m. To raise the flag it is slid onto the telescopic bracket by its hollow hem. The side carabiner hooks are hooked into the loosely supplied flag slings. The flag slings rotate along with the flag under wind load. Flag sizes (max.) of 1.50 x 5.00 m
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
