7 m aluminium pole, ZA100K, Ø 100 mm, internal halyard, winch drive, outrigger / gallows arm has the item number 8116.17 and is characterised by nominal height 7 m, pole diameter 100 mm, outrigger, cylindrical design. The variant can be supplied from 802,06 € incl. VAT.
At 7 m of visible pole height, the pole is the typical choice for company entrances, car dealerships and club grounds. For poles of this height we recommend portrait flags of roughly 350 to 500 cm in length – as a rule of thumb, a flag should be about half to two thirds of the nominal height. Installation requires a foundation with a ground socket – the 7 m nominal height refers to the visible section above ground level. The pole diameter of 100 mm determines the matching socket size. You will find the matching foundation plan in the „Instructions“ tab. The cylindrical pole body of aluminium measures 100 mm in diameter. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Flagpoles with a telescopic bracket ensure advertising impact regardless of the wind. The flag is easy to read at all times.
High operating comfort and extensive theft protection thanks to an internal halyard proven tens of thousands of times over characterise this hoisting system. Stainless steel rope running inside the pole tube with the new FlagLift crank hoisting system. The high-grade alloy ensures lasting stability. The anodised layer to Euras standard DIN 17611 guarantees a durable, attractive surface finish.
Delivery: ready to hoist
Nominal height 7.00 m, total length 7.80 m, D = 100 mm, telescopic bracket 100/160 cm, cylindrical pole tube with groove, EN AW-6082T6, silver anodised 20 my,
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30.00 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m. To raise the flag it is slid onto the telescopic bracket by its hollow hem. The side carabiner hooks are hooked into the loosely supplied flag slings. The flag slings rotate along with the flag under wind load. Flag sizes (max.) of 1.50 x 4.00 m.
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
