8 m aluminium pole, ZA100K, Ø 100 mm, internal halyard, winch drive, outrigger / gallows arm has the item number 8116.18 and is characterised by nominal height 8 m, pole diameter 100 mm, outrigger, cylindrical design. The entry-level price is 863,94 € incl. VAT.
With 8 m of visible height above ground, the pole remains highly visible even across larger commercial sites and car parks. Portrait flags of between 400 and 550 cm in length suit this pole; in landscape format, sizes around 150 × 300 cm work well. The pole is installed in a ground socket cast in concrete; the stated 8 m remain visible above the foundation. The ground socket has to match the 100 mm diameter. You will find the matching foundation plan in the „Instructions“ tab. At 100 mm in diameter, the cylindrical tube is made of aluminium. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Flagpoles with a telescopic bracket ensure advertising impact regardless of the wind. The flag is easy to read at all times.
High operating comfort and extensive theft protection thanks to an internal halyard proven tens of thousands of times over characterise this hoisting system. Stainless steel rope running inside the pole tube with the new FlagLift crank hoisting system. The high-grade alloy ensures lasting stability. The anodised layer to Euras standard DIN 17611 guarantees a durable, attractive surface finish.
Delivery: ready to hoist
Nominal height 8.00 m, total length 8.80 m, D = 100 mm, telescopic bracket 100/160 cm, cylindrical pole tube with groove, EN AW-6082T6, silver anodised 20 my,
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30.00 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m. To raise the flag it is slid onto the telescopic bracket by its hollow hem. The side carabiner hooks are hooked into the loosely supplied flag slings. The flag slings rotate along with the flag under wind load. Flag sizes (max.) of 1.50 x 4.00 m.
Suitable accessories for safe installation and use.
With a first order this accessory is already included in the set – you do not need to order it separately.
Matching accessories, mountings and variants for this item.
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
