10 m aluminium flagpole, ZD100, Ø 100 mm, not hoistable, bracket/gallows arm, incl. tilting mount has the item number 8115.20 and is characterised by nominal height 10 m, pole diameter 100 mm, outrigger, cylindrical design. This model is available from 885,36 € incl. VAT.
At a nominal height of 10 m, the pole is designed for prestigious locations, industrial sites and groups of poles. When choosing a flag, aim for 500 to 700 cm in length in portrait format, or around 150 × 350 cm in landscape. The foundation holds a ground socket, out of which the 10 m nominal height projects. Choose the ground socket to match the 100 mm tube diameter. You will find the matching foundation plan in the „Instructions“ tab. The tube is made of aluminium and has a cylindrical profile with a diameter of 100 mm. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
The most affordable of the bracket/gallows poles from the modular range of cylindrical pole tubes with a 100 mm diameter, with a tilting device.
Nominal height 10.0 m, total length 10.0 m, D = 100 mm, telescopic bracket 100/160 cm, cylindrical pole tube without groove, silver anodised 20 my, 5 flag slings, flag weight
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30.00 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m. The side carabiner hooks are hooked into the loosely supplied flag slings.
The flag slings rotate along with the flag under wind load. Flag sizes (max.) of 1.50 x 5.00 m.
The tilting mount on an anchor cage is included in the price.
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Germany is divided into four wind zones under DIN EN 1991-1-4/NA. What matters is the basic wind velocity vb,0 at your installation site:
| Wind zone | vb,0 | approx. equals | typical location |
|---|---|---|---|
| Wind zone 1 | 22.5 m/s | 81 km/h | inland southern and central Germany |
| Wind zone 2 | 25.0 m/s | 90 km/h | large parts of central and eastern Germany |
| Wind zone 3 | 27.5 m/s | 99 km/h | inland northern Germany, coastal hinterland |
| Wind zone 4 | 30.0 m/s | 108 km/h | North Sea and Baltic coasts and islands |
Which wind zone applies to me? The classification follows the district or independent city. You will find the full map here:
» Download the German wind zone map as a PDF
What does the figure on the product page mean? In the technical data of our poles you will find a statement such as "without flag to DIN EN 1991-1-4/NA wind zone I". This is the structural verification of the pole tube – it states up to which wind zone the pole has been verified by calculation without a flag. This figure is not an exclusion criterion for higher wind zones, but the basis for the design.
I live in wind zone 2, 3 or 4 – what now? Then the configuration is decisive: the type of ground fixing (ground socket or tilting mount), foundation size, pole height and above all flag size. The same pole can often be used in a higher wind zone with a different fixing or a smaller flag. On several of our series, stability up to a nominal height of 9 m is provided as standard for wind zone 2 as well.
Please ask us: tell us the installation site (postcode), the pole height you want and the flag size – we will check suitability for your wind zone and tell you the right configuration. Telephone +49 9833 98894-0 or use our contact form.
Please note: stability at a specific site is always governed by the individual verification to DIN EN 1991-1-4/NA, taking into account terrain category, surrounding buildings and foundation. The flag must be taken down when a storm warning is issued.
Question not listed? All questions & answers · or call us: 09833 98894-0