9 m tapered rotating pole, KA-W-9, internal halyard, outrigger / gallows arm has the item number 8121.14 and is characterised by nominal height 9 m, outrigger, tapered design. The entry-level price is 1.511,30 € incl. VAT.
With 9 m of visible height above ground, the pole remains highly visible even across larger commercial sites and car parks. Portrait flags of between 450 and 650 cm in length suit this pole; in landscape format, sizes around 150 × 300 cm work well. The pole is installed in a ground socket cast in concrete; the stated 9 m remain visible above the foundation. You will find the matching foundation plan in the „Instructions“ tab. The outrigger arm holds the flag clear of the pole so it stays readable even when there is no wind.
Conical pole tube, mounted so that it rotates 360 degrees. Hoistable telescopic bracket for a max. flag width of 1.50 m. Concealed hoisting device in a mounted C-rail. Sturdy, absolutely reliable and convenient flag hoisting system. Lasting stability thanks to a pole tube in high-grade aluminium alloy EN AW-6063T66 combined with large tube cross-sections and additional internal reinforcement in the area of the rotating bearing. Durable, attractive looks thanks to silver anodising of the pole tube, minimum layer thickness 20 my to the Euras standard. C-rail as an extruded aluminium profile, anodised in the colour of the pole tube. Maximum theft protection thanks to a lockable cover. Rotating bearing using maintenance-free ball bearings and special bushings, plug-in shaft in ST50K material with the highest possible strength.
Nominal height (NH): 9.00 m, total length (GL): 9.00 m, Ø at top: 76 mm, Ø at bottom: 145 mm Stability in accordance with EN 1991-1-4/NA is met
Side tape with hooks. Hollow hem along the top edge of the fabric, Ø 30 mm, open on both sides. The topmost hook must be sewn on directly below the hollow hem. Hook spacing max. 1.00 m, max. fabric width 1.50 x 5 m. The flag is slid onto the bracket tube by its hollow hem. The topmost flag carabiner hooks into the hole of the long slide, the remaining carabiners into the eyelets of the flag fabric holders. The flag weight with stainless steel carabiner is hooked into the lowest flag fabric holder and thus prevents the flag from riding up in gusts.
The steel ground socket is included in the price.
With a first order this accessory is already included in the set – you do not need to order it separately.
| Nominal height in m | Flag size in cm |
| 5 | 80x200 |
| 6 | 100x300 |
| 7 | 150x350 |
| 8 | 100x400 |
| 9 | 120x500 |
| 10-12 | larger |
| Nominal height in m | Flag size in cm |
| 5 | 120x80 |
| 6 | 150x120 |
| 7 | 180x120 |
| 8 | 200x120 |
| 9 | 225x150 |
| 10 | 250x150 |
| 12 | 300x200 |
Question not listed? All questions & answers · or call us: 09833 98894-0
