Konische Aluminium-Flaggenmasten mit Internal halyardführung

The perlon halyard, 5 mm in diameter, is installed as a continuous loop in the C-rail. It is turned at the pole head by a pulley integrated into the pole cap. The ends of the halyard are knotted so they can be released in the topmost flag holder (which also acts as the driver). The remaining flag holders run loose in the C-rail. The halyard is dimensioned so that it ends about 30 cm below the C-rail. With the lockable cover removed, the topmost flag holder can be moved with the halyard. The remaining flag holders are pulled along by the flag carabiners. The excess length of the perlon halyard is secured on the cleat at the lower end of the C-rail. The cleat is protected by a cover resting on top of it. The poles are available in diameters from 114 mm to 177 mm (measured at the base of the pole). Tapered poles are outstandingly well suited to windier regions. When installed in a ground socket, structural stability is guaranteed up to 9 on the Beaufort scale. With a tilt mount, the KI/KIT/KIK series complies with EN 1991-1-4/NA and is therefore fully rated for structural stability.